东北黑土区黑土层厚度的时空变化     

刘凯  魏明辉  戴慧敏  刘国栋  贾树海  宋运红  梁帅 《地质与资源》2022,31(3):434

黑土层厚度是评价东北黑土区土壤质量的重要参数,但其厚度的空间分布及多年变化情况仍然不够明确.针对东北黑土区第二次土壤普查的61处典型土壤剖面进行了现状实地调查,并对黑土层厚度变化进行了对比分析.结果表明:近40年来,东北黑土区黑土层厚度平均减少了12cm,平均减薄速度为0.32cm/a.四省(区)黑土层减薄厚度具有显著差异,表现为吉林(23.65cm)>辽宁(11.83cm)>内蒙古(10.33cm)>黑龙江(6.83cm).吉林省黑土层减薄厚度和比例最大,生态风险最为严峻.吉林省黑土层厚度变化值与气温升高值呈显著的负相关关系,表明随着气候变暖,土壤有机质下降明显,黑土层的厚度也呈减薄趋势.研究表明,水蚀作用也是黑土层厚度减薄的重要影响因素.未来应加强黑土层厚度判定和黑土层厚度空间制图等方面研究,对指导黑土地保护利用具有重要意义.  相似文献   

Evaluation and comparison of CMIP6 models and MERRA-2 reanalysis AOD against Satellite observations from 2000 to 2014 over China     

《地学前缘(英文版)》2022,13(2):101325

Rapid industrialization and urbanization along with a growing population are contributing significantly to air pollution in China. Evaluation of long-term aerosol optical depth (AOD) data from models and reanalysis, can greatly promote understanding of spatiotemporal variations in air pollution in China. To do this, AOD (550 nm) values from 2000 to 2014 were obtained from the Coupled Model Inter-comparison Project (CIMP6), the second version of Modern-Era Retrospective analysis for Research, and Applications (MERRA-2), and the Moderate Resolution Imaging Spectroradiometer (MODIS; flying on the Terra satellite) combined Dark Target and Deep Blue (DTB) aerosol product. We used the Terra-MODIS DTB AOD (hereafter MODIS DTB AOD) as a standard to evaluate CMIP6 Ensemble AOD (hereafter CMIP6 AOD) and MERRA-2 reanalysis AOD (hereafter MERRA-2 AOD). Results show better correlations and smaller errors between MERRA-2 and MODIS DTB AOD, than between CMIP6 and MODIS DTB AOD, in most regions of China, at both annual and seasonal scales. However, significant under- and over-estimations in the MERRA-2 and CMIP6 AOD were also observed relative to MODIS DTB AOD. The long-term (2000–2014) MODIS DTB AOD distributions show the highest AOD over the North China Plain (0.71) followed by Central China (0.69), Yangtse River Delta (0.67), Sichuan Basin (0.64), and Pearl River Delta (0.54) regions. The lowest AOD values were recorded over the Tibetan Plateau (0.13 ± 0.01) followed by Qinghai (0.19 ± 0.03) and the Gobi Desert (0.21 ± 0.03). Large amounts of sand and dust particles emitted from natural sources (the Taklamakan and Gobi Deserts) may result in higher AOD in spring compared to summer, autumn, and winter. Trends were also calculated for 2000–2005, for 2006–2010 (when China introduced strict air pollution control policies during the 11th Five Year Plan or FYP), and for 2011–2014 (during the 12th FYP). An increasing trend in MODIS DTB AOD was observed throughout the country during 2000–2014. The uncontrolled industrialization, urbanization, and rapid economic development that mostly occurred from 2000 to 2005 probably contributed to the overall increase in AOD. Finally, China's air pollution control policies helped to reduce AOD in most regions of the country; this was more evident during the 12th FYP period (2011–2014) than during the 11th FYP period (2006–2010). Therefore this study strongly advises the authority to retain or extend these policies in the future for improving air quality.  相似文献   

四川省都江堰市龙池地区泥石流危险性评价研究   总被引：1，自引：0，他引：1  

刘清华  余斌  唐川  李丽 《地球科学进展》2012,27(6):670-677

汶川地震灾区震后泥石流灾害较震前活跃,对灾区泥石流危险性进行评价是灾后重建过程中合理防灾减灾的基础工作。通过研究泥石流灾害事件中的泥石流规模、泥石流沟堆积扇面积及相应的灾害损失等基础资料,提出以泥石流在泥石流沟堆积扇上的平均堆积厚度替代泥石流规模作为主要危险因子的单沟泥石流危险性评价方法。用该方法对汶川震区都江堰市龙池镇龙溪河流域2010年"8.13"泥石流事件中的29条沟谷型泥石流进行危险性评价,评价结果中9条为高度危险,12条为中度危险,8条为低度危险。用以泥石流规模为主要危险因子的单沟泥石流危险性评价方法进行对比评价,2种评价方法中有65.5%的泥石流的危险性评价结果一致。以泥石流沟堆积扇平均堆积厚度为主要危险因子的单沟泥石流危险性评价方法更能突出规模对泥石流综合危险度的贡献,能更好地反映小泥石流流域和小泥石流堆积扇的泥石流在中小规模的泥石流总量下的危险程度。  相似文献   

卫星遥感反演土壤水分研究综述   总被引：12，自引：1，他引：11  

陈书林  刘元波  温作民 《地球科学进展》2012,27(11):1192-1203

土壤水分是影响地表过程的核心变量之一。精准地测量土壤水分及其时空分布,长期以来是定量遥感研究领域的难点问题。简要回顾基于光学、被动微波、主动微波和多传感器联合反演等卫星遥感反演土壤水分的主要反演算法、存在的难点和前沿性研究问题,介绍了应用土壤水分反演算法所形成的3种主要全球土壤水分数据集,包括欧洲气象业务卫星（ERS/MetOp）数据集、高级微波扫描辐射计（AMSR-E）数据集、土壤湿度与海洋盐分卫星（SMOS）数据集,并结合目前存在的问题探讨卫星遥感反演土壤水分研究的发展趋势。  相似文献   

A complex variable solution for stress and displacement field around a lined circular tunnel at great depth     

Ming‐Bin Wang  Shu‐Cai Li 《国际地质力学数值与分析法杂志》2009,33(7):939-951

By applying the series expansion technique in the complex variable method established by Muskhelishvili, the plane elasticity problem for the stress and displacement field around a lined circular tunnel in conjunction with the consideration of misfit and interaction between the liner and the surrounding geomaterial is dealt with. The tunnel is assumed to be driven in a homogeneous and isotropic geomaterial. The coefficients in the Laurent series expansion of the stress functions are determined. The complex potentials in the liner and the surrounding geomaterial are explicitly derived, respectively. As an example, the case of a lined circular tunnel located in an isotropic initial stress field but subjected to uniform internal pressure is numerically considered. Numerical results indicate that the installation of tunnel liner can reduce the influences of the tunnel excavation on the in situ displacement and stress fields. However, the relative thickness and rigidity of the liner should be in an appropriate range. In addition, the effect of the tunnel excavation upon the displacement field is more significant than that upon the stress field. As far as the stress field in the surrounding geomaterial is concerned, when the ratio between the cover depth of tunnel and the tunnel radius is larger than 5, the results for the stress field in the paper are applicable. When the ratio between the tunnel depth and the tunnel radius is larger than 20, the results are applicable for the displacement field. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

浅地层剖面交互拾取解释技术研究   总被引：6，自引：0，他引：6       下载免费PDF全文

丁维凤  罗进华  来向华  苟铮慷  傅晓明 《海洋科学》2008,32(9):1-6

浅地层剖面探测在海洋学研究与海洋工程调查中使用愈来愈频繁，剖面资料的解释工作变得越来越繁重。因浅地层剖面实际解释工作的需要，结合浅地层剖面资料的特点，研究并实现了剖面反射层位的自动拾取、利用Event号交互拾取特征点、等Ping间隔拾取、求取海底下反射层位厚度等解释功能，这些解释功能的实现加快了剖面解释工作的进度，提高了解释结果的精度，并在实际浅地层剖面资料解释工作中取得了良好的应用效果。  相似文献   

Coupled HM analysis using zero‐thickness interface elements with double nodes—Part II: Verification and application     

J. M. Segura  I. Carol 《国际地质力学数值与分析法杂志》2008,32(18):2103-2123

In a companion Part I of this paper (Int. J. Numer. Anal. Meth. Geomech. 2008; DOI: 10.1002/nag.735 ), a coupled hydro‐mechanical (HM) formulation for geomaterials with discontinuities based on the finite element method (FEM) with double‐node, zero‐thickness interface elements was developed and presented. This Part II paper includes the numerical solution of basic practical problems using both the staggered and the fully coupled approaches. A first group of simulations, based on the classical consolidation problem with an added vertical discontinuity, is used to compare both the approaches in terms of accuracy and convergence. The monolithic or fully coupled scheme is also used in an application example studying the influence of a horizontal joint in the performance of a reservoir subject to fluid extraction. Results include a comparison with other numerical solutions from the literature and a sensitivity analysis of the mechanical parameters of the discontinuity. Some simulations are also run using both a full non‐symmetric and a simplified symmetric Jacobian matrix. On top of verifying the model developed and its capability to reflect the conductivity changes of the interface with aperture changes, the results presented also lead to interesting observations of the numerical performance of the methods implemented. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

Automatic registration of optical imagery with 3D LiDAR data using statistical similarity     

《ISPRS Journal of Photogrammetry and Remote Sensing》2014

The development of robust and accurate methods for automatic registration of optical imagery and 3D LiDAR data continues to be a challenge for a variety of applications in photogrammetry, computer vision and remote sensing. This paper proposes a new approach for the registration of optical imagery with LiDAR data based on the theory of Mutual Information (MI), which exploits the statistical dependency between same- and multi-modal datasets to achieve accurate registration. The MI-based similarity measures quantify dependencies between aerial imagery, and both LiDAR intensity data and 3D point cloud data. The needs for specific physical feature correspondences, which are not always attainable in the registration of imagery with 3D point clouds, are avoided. Current methods for registering 2D imagery to 3D point clouds are first reviewed, after which the mutual MI approach is presented. Particular attention is given to adoption of the Normalised Combined Mutual Information (NCMI) approach as a means to produce a similarity measure that exploits the inherently registered LiDAR intensity and point cloud data so as to improve the robustness of registration between optical imagery and LiDAR data. The effectiveness of local versus global similarity measures is also investigated, as are the transformation models involved in the registration process. An experimental program conducted to evaluate MI-based methods for registering aerial imagery to LiDAR data is reported and the results obtained in two areas with differing terrain and land cover, and with aerial imagery of different resolution and LiDAR data with different point density are discussed. These results demonstrate the potential of the MI and especially the CMI methods for registration of imagery and 3D point clouds, and they highlight the feasibility and robustness of the presented MI-based approach to automated registration of multi-sensor, multi-temporal and multi-resolution remote sensing data for a wide range of applications.  相似文献   

Assessment of satellite ocean color products of MERIS,MODIS and SeaWiFS along the East China Coast (in the Yellow Sea and East China Sea)     

《ISPRS Journal of Photogrammetry and Remote Sensing》2014

The validation of satellite ocean-color products is an important task of ocean-color missions. The uncertainties of these products are poorly quantified in the Yellow Sea (YS) and East China Sea (ECS), which are well known for their optical complexity and turbidity in terms of both oceanic and atmospheric optical properties. The objective of this paper is to evaluate the primary ocean-color products from three major ocean-color satellites, namely the Moderate Resolution Imaging Spectroradiometer (MODIS), Medium Resolution Imaging Spectrometer (MERIS), and Sea-viewing Wide Field-of-view Sensor (SeaWiFS). Through match-up analysis with in situ data, it is found that satellite retrievals of the spectral remote sensing reflectance R_rs(λ) at the blue-green and green bands from MERIS, MODIS and SeaWiFS have the lowest uncertainties with a median of the absolute percentage of difference (APD_m) of 15–27% and root-mean-square-error (RMS) of 0.0021–0.0039 sr⁻¹, whereas the R_rs(λ) uncertainty at 412 nm is the highest (APD_m 47–62%, RMS 0.0027–0.0041 sr⁻¹). The uncertainties of the aerosol optical thickness (AOT) τ_a, diffuse attenuation coefficient for downward irradiance at 490 nm K_d(490), concentrations of suspended particulate sediment concentration (SPM) and Chlorophyll a (Chl-a) were also quantified. It is demonstrated that with appropriate in-water algorithms specifically developed for turbid waters rather than the standard ones adopted in the operational satellite data processing chain, the uncertainties of satellite-derived properties of K_d(490), SPM, and Chl-a may decrease significantly to the level of 20–30%, which is true for the majority of the study area. This validation activity advocates for (1) the improvement of the atmosphere correction algorithms with the regional aerosol optical model, (2) switching to regional in-water algorithms over turbid coastal waters, and (3) continuous support of the dedicated in situ data collection effort for the validation task.  相似文献   

基于卫星高度计的北极海冰厚度变化研究   总被引：5，自引：3，他引：2  

毕海波  黄海军  苏乔  严立文  刘艳霞  徐秀丽 《海洋学报(英文版)》2014,33(11):134-140

A modified algorithm taking into account the first year(FY) and multiyear(MY) ice densities is used to derive a sea ice thickness from freeboard measurements acquired by satellite altimetry ICESat(2003–2008). Estimates agree with various independent in situ measurements within 0.21 m. Both the fall and winter campaigns see a dramatic extent retreat of thicker MY ice that survives at least one summer melting season. There were strong seasonal and interannual variabilities with regard to the mean thickness. Seasonal increases of 0.53 m for FY the ice and 0.29 m for the MY ice between the autumn and the winter ICESat campaigns, roughly 4–5 month separation, were found. Interannually, the significant MY ice thickness declines over the consecutive four ICESat winter campaigns(2005–2008) leads to a pronounced thickness drop of 0.8 m in MY sea ice zones. No clear trend was identified from the averaged thickness of thinner, FY ice that emerges in autumn and winter and melts in summer. Uncertainty estimates for our calculated thickness, caused by the standard deviations of multiple input parameters including freeboard, ice density, snow density, snow depth, show large errors more than 0.5 m in thicker MY ice zones and relatively small standard deviations under 0.5 m elsewhere. Moreover, a sensitivity analysis is implemented to determine the separate impact on the thickness estimate in the dependence of an individual input variable as mentioned above. The results show systematic bias of the estimated ice thickness appears to be mainly caused by the variations of freeboard as well as the ice density whereas the snow density and depth brings about relatively insignificant errors.  相似文献